(2) Prepare the area
First, clean the area thoroughly with a microfiber cloth to remove any dust, dirt, or
oil that could affect the bracket's grip. Then, remove the film of the electrostatic
sticker and apply the electrostatic sticker to the windshield.
(3) Place the dash cam
First, tear off one film of the bracket sticker and apply it to the bracket. Second,
remove another film from the bracket sticker. Lastly, stick the bracket to the
selected area on the windshield.
Note: Please make sure there is no air between the electrostatic sticker and the
windshield, which is the key point to make the installation more stable.
Tips:
1) If you want to remove the dash cam, be sure to remove the electrostatic sticker.
To Next Page
Loading...
