2) You can install the dash cam on the windshield without using the electrostatic
sticker. This allows you to effortlessly remove the camera by simply pushing the
GPS buckle towards left.
3) If you prefer not to use the electrostatic sticker, it is important to clean and dry
the installation area thoroughly before attaching the dash cam directly to the
windshield using the bracket sticker.
4) The electrostatic sticker's adhesive properties may diminish over time or when
exposed to rain or direct sunlight. Please do not hesitate to contact customer
service for some free stickers.
(4) Adjust the viewing angle
The bracket supports a horizontal rotation of up to 60° and a vertical rotation of
up to 90°. Moreover, the front camera lens can be rotated up to 220°. So feel free
to adjust the bracket and the front camera lens as desired after installing the dash
cam on the windshield.
Supports up to 60°
horizontal rotation
Up to 90° vertical
rotation
Supports up to
220° rotation
To Next Page
Loading...
