Kingtel KT52IP - Page 53

call will be rejected.
DND Return Code
Specify SIP Code returned for DND. Default is 480 - Temporarily
Not Available.
Busy Return Code
Specify SIP Code returned for Busy. Default is 486 – Busy Here.
Reject Return Code
Specify SIP Code returned for Rejected call. Default is 603 –
Decline.
Active URI Limit IP
IP address of the server for the Action URL messages described
below.
Push XML Server
IP address for XML server which can send display content to the
phone.
Enable Call Waiting
Tone
Enables audible notification of call waiting.
Enable Multi Line
Enable phone to make calls for 10 lines max, or disable for 2 lines
max.
Enable Auto Switch
Line
Enable phone to select an available SIP line as default automatically.
Play Dialing DTMF
Tone
Enable dialing DTMF tone played, or disable for dialing DTMF tone
played.
Action URL Settings
URL for various actions performed by the phone. These actions
are recorded and sent as xml files to the server. Sample format is
http://InternalServer /FileName.xml
Block Out Settings
Add or Delete Blocked numbers – Enter the prefix of numbers
which should not be dialed by the phone. For example, if 001 is
entered, the phone will not dial any numbers beginning with 001.
X and x are wildcards which match single digits. For example, if
4xxx or 4XXX is entered, the phone will not dial any 4 digit
numbers beginning with 4. It will dial numbers beginning with 4
which are longer or shorter than 4 digits.