1-4 CK20
196O106A
A ROPS should never be modified by
welding, grinding, or cutting, as this can
weaken the ROPS structure. If any com-
ponents of the ROPS unit is damaged it
must be replaced.
If the ROPS unit is removed or loosened
for any reason, the parts should be fit-
ted back to their originals position and all
bolts should be properly torqued.
NOTE
Always use seat belt when the trac-
tor is equipped with a ROPS. Never
use the seat belt when tractor is not
equipped with a ROPS.
(ROPS: Roll-Over Protective Structures)
21.Extra caution should be taken when
driving tractors with narrow tread
widths. For added stability you should
adjust you rear wheel tread width,
see page 12-20.
196O132A
19.Before starting your tractor you
should disengage the clutch, and in-
sure that all shift levers are in the
neutral position.
20.For your safety ROPS with a seat belt
is recommended for most applications.
(1) Tread
To Next Page
Loading...
