Kioti CK20 - OPERATING THE P.T.O

1-10 CK20
196O124A
196O123A196O122A
3. Before installing or using P.T.O driven
equipment, read the maunfacturer’s
manual and review the safety labels
attached to the equipment.
4. When operating stationary P.T.O
driven equipment, always apply the
tractor parking brake and place chocks
behind and in front of the rear wheels.
Stay clear of all rotating parts.
(1) 3-point hitch lowering speed knob
(A) ”FAST” (C) ”LOCK”
(B) ”SLOW”
USING 3-POINT HITCH
1. Use the 3-point hitch only with equip-
ment designed for 3-point hitch usage.
2. When using a 3-point hitch mounted
implement, be sure to install the proper
counterbalance weight on the front of
the tractor.
3. When transporting on the road, set the
implement lowering control in the
“LOCK” position to hold the implement
in the raised position.
(1) P.T.O Shaft Cap (2) P.T.O Shaft Cover
OPERATING THE P.T.O
1. Make sure the tractor is completely
stopped, and all moving components
have completely stopped, before
connecting, disconnecting, adjusting,
cleaning, or servicing any P.T.O driven
equipment.
2. Keep the P.T.O shaft cover in place at
all times. Replace the P.T.O shaft cap
when the shaft is not in use.