EasyManua.ls Logo

Kioti CK20 - Checking Brake and Clutch Pedals; Checking Coolant Level

Kioti CK20
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12-6 CK20
1. The brake and clutch pedals should
be inspected for free travel, and
smooth operation.
2. You should adjust these pedals if an
incorrect measurement is found. (See
“adjusting clutch and brake pedals” in
the 100 hour maintenance schedule.)
CHECKING BRAKE AND CLUTCH
PEDALS
NOTE
Brake pedals should be equal when
depressed.
196OC08A
CHECKING COOLANT LEVEL
1. Check to see that the coolant level is
between the “FULL” and “LOW” marks
of recovery tank.
2. When the coolant level drops due to
evaporation, add water only up to the
full level.
In case of leakage, add anti-freeze and
water in the specified mixing ratio up
to the full level.
(See “Flush Cooling System and
Changing Coolant” in every 2 yours
maintenance.)
(1) Recovery Tank
(A) FULL (B) LOW
CAUTION
To avoid personal injury:
Do not remove radiator cap while
coolant is hot. When cool, slowly
rotate cap to the first stop and
allow sufficient time for excess
pressure to escape before re-
moving the cap completely.
IMPORTANT
If the radiator cap has to be
removed, follow the caution above
and securely retighten the cap.
Use clean, fresh water and anti-
freeze to fill the recovery tank.
If water should leak, consult your
local KIOTI dealer.

Table of Contents

Other manuals for Kioti CK20

Related product manuals