OPERATING THE ENGINE 6-5
CHECK TO SEE THAT ALL THE
LAMPS ON THE EASY CHECKER
ARE “OFF”.
If the lamp is still on, immediately stop the
engine and determine the cause.
TURN THE KEY TO “PREHEAT”
POSITION AND HOLD IT FOR
ABOUT 9 SECONDS.
TURN THE KEY TO “START”
POSITION AND RELEASE WHEN
THE ENGINE STARTS.
IMPORTANT
The engine will not start unless
the range gear shift lever (Hi-Lo)
and the P.T.O clutch lever are in
the “OFF” position.
NOTE
Glow plug indicator (5) comes on
while engine is being preheated.
To Next Page
Loading...
