1-4 DK651/751/801/901
A ROPS should never be modified by
welding, grinding or cutting, as this can
weaken the ROPS structure. If any com-
ponents of the ROPS unit is damaged, it
must be replaced.
If the ROPS unit is removed or loosened
for any reason, the parts should be fitted
back to their original positions and all bolts
should be properly torqued.
NOTE
Always use seat belt when the tractor
is equipped with a ROPS. Never use
the seat belt when tractor is not
equipped with a ROPS.
(ROPS: Roll-Over Protective Structures)
21.Extra caution should be taken when
driving tractors with narrow tread
widths. For added stability you should
adjust your rear wheel tread width, see
page 5-23.
19.Before starting your tractor you
should depress the clutch, and make
sure that all shift levers are in the
neutral position.
20.For your safety ROPS with a seat belt
is recommended for most applications.
C86O106A
C86O107A
(1) Max. tread width (2) Rear wheels
To Next Page
Loading...
