DISCRIPTION OF OPERATING SYSTEM 4-9
Always check the engine coolant level
before starting the tractor.
The temperature gauge indicates the en-
gine coolant temperature. Always allow
the tractor to reach its normal operating
temperature before doing work.
Immediate action is required if the tem-
perature exceeds the normal range. Do
not operate the tractor if the temperature
gauge reaches the red section of the
range.
The hour meter shows the number of
hours the tractor has been operated at
rated engine rpm. The last digit (white
background) indicates 1/10 of an hour.
The tachometer indicates engine speed
in revolutions per minute (RPM).
C86O411A C86O412A
TACHOMETER/HOUR METER TEMPERATURE GAUGE
(1) Hour Meter
(2) Engine Revolution Meter
(1) Temperature Gauge
C86O413A
(1) Fuel Gauge
FUEL GAUGE
Fuel gauge indicates the amount of fuel.
Be careful to refill the fuel tank before it
becomes empty. Once the fuel tank be-
comes empty, it will be necessary to
bleed the fuel system before the engine
will restart.
To Next Page
Loading...
