5-20 DK6511/751/801/901
1. Level or tilt the implement from the
operator’s station. Setting depends on
the type of implement.
2. Activate the rocker switch to make the
leveling adjustment.
LEVELING ADJUSTMENT (LIFT CYLIN-
DER EQUIPPED) (DK751,801,901)
C86O527A
(A) Up (B) Down
ATTACHING DEVICES FOR GENERAL
IMPLEMENTS
C86O526A
1. Fix lower link (LH & RH) so that the
links do not come in contact with the
wheels.
2. Use the bracket provided to secure
the top link.
WHEN IMPLEMENT IS NOT ATTACHED
1. Extend or retract the top link to adjust
the inclination of an implement.
2. Secure the top link adjustment with the
lock nut after adjusting the top link.
3. The position for connecting the top link
varies depending on the type of
implement.
ADJUSTMENT OF TOP LINK
(1) Lower Link
(2) Drawbar Hitch
(3) Top Link
(4) Lift Linkage
(5) Stabilizer
To Next Page
Loading...
