OPERATION 5-15
LIFTING DEVICES FOR AN ATTACH-
MENT
The hydraulic lift will raise and lower
implements attached to the 3-point hitch.
It can be operated anytime that the en-
gine is running; whether or not the clutch
is engaged.
POSITION CONTROL
C86O517A
(1) Position Control Lever
DK651
DK751/801/901
WARNING
The implement can be lowered
even with the engine off. Take spe-
cial care not to do this inadver-
tently. Never leave an implement
in the raised position.
DRAFT CONTROL
C86O518A
(1) Draft control Lever
DK651
DK751/801/901
Operating the position control lever ac-
tuates the hydraulic lift arm. This con-
trols the elevation of the 3-point hitch
mounted implement.
Place the position control lever in a suit-
able position and set the implement pull
with the draft control.
To Next Page
Loading...
