3130
CANISTER CLEANER AND ATTACHMENTS
Portable Shampooer
The Portable Shampooer is used to shampoo steps and small
areas that can not be cleaned with the full-sized Multi-Surface
Shampoo System.
1
Vacuum the surface to be cleaned.
2
Assemble the Portable Shampooer in the same manner as
the Portable Sprayer. See page 28. Fill jar to the first line
with water. Add Kirby Carpet Shampoo until the liquid
reaches the second line on the jar.
3
Attach the Portable Shampooer cap to the end of the
Portable Sprayer.
4
Turn the unit on and pull the trigger to make suds.
Turn the control on the trigger to adjust the suds volume.
5
Spray suds directly onto the surface being cleaned. Work
suds into the surface with a soft clean brush or sponge until
they disappear. Allow the surface to dry completely and
then
vacuum to remove the dry residue which contains dirt
and grime.
NOTICE Property Damage Risk. Do not use the Portable
Shampooer on delicate upholstery fabrics such as silk,
brocade or velvet. If in doubt, try a test patch. Let the test
patch dry and then check it before shampooing further.
6
Thoroughly clean the Portable Shampooer after use.
See page 29.
To Next Page
Loading...
Need help?
General
