Kirby Avalir G10E Sentria User Manual

51
Turbo Accessory
The Turbo Accessory can be used as a sander, a polisher, or for
scouring. The Turbo Accessory is used with the hose on the front
of the unit.
Turbo Sanding
1
Assemble the Turbo Sander. First, unsnap the sander dust
shroud and lift off.
2
Rotate the clamp levers on the side of the Turbo Accessory
up. Slide a sheet of sandpaper into the front clamp and lock
the lever. Tightly wrap the sandpaper around the bottom of
the Turbo Accessory, tuck the end into the rear clamp,
and lock in place.
Three grades of sandpaper come with the Turbo
Accessory. Each piece is a standard 1/3 sheet. Use fine
paper for a smooth finish and coarse paper to clear rough
surfaces.
3
With the Turbo Accessory on a level surface, reattach the
sander dust shroud with the opening to the rear. Insert
the Attachment Hose.
OPTIONAL ACCESSORIES

Kirby Avalir G10E Sentria Specifications

General

Brand	Kirby
Model	Avalir G10E Sentria
Category	Vacuum Cleaner
Language	English