5352
OPTIONAL ACCESSORIES
4
Grip the Turbo Accessory at the front and rear and turn
the Kirby unit on. Press the button on the top of the
Turbo Accessory to turn on.
While applying light pressure, move it over the surface
slowly. Allow the Turbo Accessory to do the work. Don’t
force it or lean heavily on it.
Sanding can result in an explosive mixture of fine dust
and air. Use sanding machine only in well-ventilated area.
- Never leave a dust bag unattended with sanding dust.
- Never empty the contents of the dust bag into a fire.
- Replace the dust bag when the bag is 1/3 full and
empty the bag each time you finish using the machine.
- Be sure no metal objects, such as tacks, nails, etc. are
sticking up from the surface. They can damage the
sandpaper and the Turbo Accessory. Always use a
hammer and punch to countersink all nails before
sanding. Hitting a nail while sanding can cause
sparks and create an explosion or fire.
- Always wear safety glasses.
Turbo Polishing
Attach the synthetic lamb’s wool pad using the same procedure
as attaching sandpaper. Do not reattach the dust shroud.
It is not used for polishing.
Use Turbo Accessory for polishing tabletops, paneling, and
large flat surfaces.
Turbo Scouring
Attach the webbed nylon scouring pad using the same procedure
as attaching sandpaper. Do not reattach the dust shroud. It is not
used for scouring.
Use Turbo Accessory for scouring hard surfaces such as ceramic
tile. Do not use on painted surfaces.
To Next Page
Loading...
Need help?
General
