5756
Belt and Brush Roll Replacement
See detailed instructions on page 53.
Wheel Wear and Replacement
Kirby® wheels are made with a pliable tread that is designed to prevent carpet wear and
damage to floors. After extended periods of use, the tread on the wheels will wear out and
the wheels will need to be replaced.
Check the wheel treads. If any of the plastic wheel is showing through the tread, contact an
authorized Kirby Distributor to replace the wheels.
Cord Replacement
If the electrical cord becomes cut or frayed, DO NOT USE THE UNIT. Contact an autho
rized Kirby Distributor for replacement.
The new replacement cord should be attached to the unit first before it is plugged into
the wall outlet.
Headlight Replacement
If one or more of the LED lights in the Headlight burn out, contact an authorized Kirby
Distributor for replacement.
Servicing a Double Insulated Appliance
In a double insulated appliance, two systems of insulation are provided instead of a ground-
ing. No grounding means is necessary, nor should a means for grounding be added to the
appliance. A double insulated appliance is marked with the words “DOUBLE INSULATED”
(U.S.A. and Canada). The symbol may also be marked on the appliance.
Servicing a double insulated appliance requires extreme care and knowledge of the system
and should be done only by qualified service personnel.
Replacement parts for this double insulated model must be genuine Kirby® parts for
maintenance of safety and protection of warranty.
MAINTENANCE
To Next Page
Loading...
Need help?
General
