55
MAINTENANCE
Adjusting the Brush Roll Height
1
The Brush Roll height is adjustable. The bristles, which wear
down after long periods of use, can be extended.
Follow the directions for changing the Power Nozzle belt on
page 53. When the brush has been removed, select the
Brush Roll height.
2
Rotate the Brush Roll ends to the desired setting: 1, 2 or 3
notches. Make sure the setting is the same on both ends.
The greater the number of notches, the further the bristles
are extended.
Reinsert the Brush Roll and attach the Rug Plate.
Service Tips
Keep the entire Brush Roll and belt track clear of lint, string, hair
and other fibers. This will allow the Brush Roll to perform at its
fullest potential.
Keep Motor Shaft free from lint, hair and debris built-up.
Motor shaft may be hot. Allow to cool before touching
or removing lint, hair or debris.
Keep Motor Shaft free from lint, hair, and debris build up.
Failure to follow these warnings may result in damage to
the Attachment Hose as well as bodily injury.
To Next Page
Loading...
Need help?
General
