3736
Cleaning The Multi-Surface
Shampoo System
1
Turn the Suds Control Valve to the off position.
2
Push the Toe-Touch Control Bottom Pedal all the way down
to raise the nozzle and tray. Let the unit run for several
seconds to allow any remaining shampoo and water to
spin off the brush. Turn the unit off and unplug it.
3
Lift the Waste Tray and carry to a sink to empty. Thoroughly
rinse all parts of the tray and set aside to dry.
4
Remove the hose from the bottom of the Shampoo Tank.
5
Raise the Headlight Hood. Turn the Belt Lifter counterclock
wise until the red arrows line up.
OPTIONAL ACCESSORIES
To Next Page
Loading...
Need help?
General
