Kirby Avalir G10E Sentria User Manual

49
OPTIONAL ACCESSORIES
4
Make sure Tech Drive® power assist is in neutral and turn
the cleaner on.
6
Allow floor to completely dry before walking on surface.
7
Disassemble and rinse parts of the Multi-Surface
Shampoo System. Allow parts to dry before storage.
5
Press the Toe Touch Control Upper Pedal repeatedly until the
Tile and Grout brush roll contacts the floor. Move the cleaner
over the area to be cleaned. Spray additional cleaner
as needed.

Kirby Avalir G10E Sentria Specifications

General

Brand	Kirby
Model	Avalir G10E Sentria
Category	Vacuum Cleaner
Language	English