User Manual
54
During radio check, if the retry count is used up and no response is received, the radio will exit the radio
check, and “request timed out” will be displayed.
11.2 Call Alert
Call alert feature allows authorized caller radio to request a target radio to call back.
1) Receiving and Responding to Call Alert
a) When the radio received call alert, it will automatically reply if call alert decode is enabled.
b) The LCD shows “Call Alert…” and the alias or ID of caller radio.
c) The radio periodically sounds alert tone and orange LED is flashing.
d) Press the PTT key to respond to the caller radio, or press any other key to ignore the call alert.
2) Initiating Call Alert
a) In the home page, press to enter the menu.
b) Select “Contact”.
c) Select “Contact List”, and then select a target private call contact.
d) Select “Call Alert”.
e) The screen will show the alias or ID of the target contact, and indicates that the radio is sending call alert.
To Next Page
Loading...
Need help?
General
