Declaration of compliance CE relating to machines
Builder
Company : KLUBB
Adress : 12, av. James de Rothschild 77164 Ferrières en Brie, France
Telephone : +33 (0)1 60 95 12 47
Fax : +33 (0)1 60 05 68 38
Product identification
Description : Mobile Elevator platform for persons (MEPP) type 1 B
Type : KLUBB K32
PMEE Serial Number : 150001
Vehicle : Renault Master L2H2
Vehicle Serial Number : VF6MFFESC53485528
Technical datasheet
Without prejudice to its intellectual property rights, the request for information duly motivated on the technical
report is possible by letter to the following address:
Adress : KLUBB - 12, av. James de Rothschild 77164 Ferrières en Brie, France
Compliance
This product has been processed and validated in compliance with the machin directive of the 17th of may 2006
(2006/42/CE), the directive relating to electromagnetic compatibility of the 15th of december 2004 (2004/108/CE)
and the directive relating to the noise emission in the environment for the equipment used in the open of the 8
th
of may 2000 (2000/14/CE).
The assembly of the higher structure of the MEPP and its installation on the vehicle have been processed in
accordance to the methods defined by the builder and to the camber specifications given by the vehicle builder.
The results of all the assembly controls, tests and reviews are registered in accordance to the builders quality
process.
No modification of any of the security parts such as control panels, security devices or any options related to the
security of the elevator will be authorized without an explicit agreement from the KLUBB company.
Type CE review
This receipt by type has been approved by the following notified organization :
Name : APAVE Parisienne SAS
Identification number : 0060
Adress : 17 rue Salneuve – 75854 Paris CEDEX
CE certificate type : 0060/ 5536 / 760 / 11/15 / 0001
Harmonized standards
Conception, manufacturing, installation, protection and tests of the MEPP have been made in accordance to the
european, international ans national standards. The most important are mentioned hereafter :
EN 280 MEPP – Design calculation – Stability criters – Building – Security – Tests and reviews
EN 349 Machines safety – Minimum distance to avoid body parts crushing risks
EN 13849-1 Machines safety – Parts of the control systems relating to safety - Part 1 : General conception
principles
EN 13849-2 Machines safety – Parts of the control systems relating to safety - Part 2 : Validation
EN 60204-1 Machines safety – Parts of the control systems relating to safety - Part 1 : General rules
ISO 20381 MEPP – Symbols for the operator’s controls and other indicators
Place of statement : Ferrières en Brie, France Date : 23/11/2015
Authorized person to write this statement.
Name : Julien Bourrellis Position : CEO
Signature :
To Next Page
Loading...
