EasyManua.ls Logo

KLUBB K21 - Before Starting Work Procedures; Safe Working Practices

Default Icon
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER MANUAL – Latest review : 09/05/2016 – RD
19
E. Before starting to work
Before starting the engine of the vehicle, always disconnect the Power Take Off (P.T.O)
Before driving, always check that the machine is on the ā€œTravelā€ position.
Always make the daily controls provided in this manual.
Check the level of the machine before making any movement. Choose the space where you place
the vehicle which should be compact, flat and steady. Observe the maximum tilting specified on
the builder’s plate.
For vehicles equipped with hydraulic outrigger (option):
1 : Engage the vehicle parking brake.
2 : Take the outriggers out, avoiding to set them on places like manhole covers.
Warning : Always take care not to set the outriggers on your or another person feet. It could
results in serious injuries.
For vehicles without hydraulic outrigger (option):
1 : Engage the vehicle parking brake.
2 : Put on the wheel chocks.
If the lift must be installed on the road, or if visibility is diminished, signalizing is compulsory. Use
the luminous signalling devices equipped on the vehicle as well as reflective strips and any other
elements available.
F. While working
Always make sure that no one (people or animals) is standing in the operating area of the
machine. In any manner, avoid contacts with any other element or construction.
It is forbidden to place ladders or any other device on the platform in order to increase the
working eight as well as any objects that could increase windage.
It is forbidden to work near high voltage lines. In any manner, always keep the platform at a
minimum of 5m from any cable.
It is forbidden to move the vehicle when the operator is inside on the platform (Type 1B lift).
It is forbidden to use the lift as a crane.
It is forbidden to use the lift if overloaded (report to the builder’s plate to check the maximum
authorized weight on the platform.
It is forbidden to move the vehicle if it is not fully folded.
Avoid letting objects fall from the platform.
It is forbidden to get in or out the platform during overhead work.
Do not press the platform against structures or constructions.
It is forbidden to use the lift if wind speed exceed the amount specified on the builder’s plate.
www.duma-rent.com

Table of Contents

Related product manuals