19
OPERATIONAL SETUP
TRACTOR PREPARATION:
Before operating implement refer to tractor operator’s manual for information concerning safe
methods of operation, hydraulics, hitch adjustment, tire inflation, wheel adjustments and
tractor weights.
Check tractor brakes and warning lights, make sure they are in proper working order.
Check tractor hydraulics oil reservoir and add oil if needed.
WARNING
TRANSPORTING THE IMPLEMENT WILL ADD SIGNIFICANT WEIGHT TO YOUR
TRACTOR. MAKE SURE THE TRACTOR IS PROPERLY BALLASTED.
Front-End Weights:
Use front-end weights as needed to provide effective steering control and front-end stability.
See your tractors Operator’s Manual for recommendations on ballasting procedures.
WARNING
DO NOT EXCEED THE TRACTOR’S LIFT CAPACITY OR BALLAST
RECOMMENDATIONS.
Horse Power Requirements:
The minimum power requirement for the 4-Row is 130 HP & 6-Row is 165 HP, depending on
soil type and tank size. (Combines are harder to pull in sandy conditions.) Select a tractor
with sufficient power to operate these machines.
Wheel Spacing
Set tractor wheels so they are equally spaced from center of tractor and centered between
the rows.
See your Tractor Operator’s Manual for correct tire inflation pressure.
Drawbar Position
Place the drawbar in the center position to keep combine in the center of the rows.
To Next Page
Loading...
Need help?
General