EasyManuals Logo

KMC Controls 42 Series User Manual

KMC Controls 42 Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
3
FORWARD
The 4265 and 4260D Poultry House Cleaner - is designed to be operated from
the stationary drawbar of the tractor. It can be operated from a lower lift arm drawbar if a sta-
tionary bar is not available. The unit comes equipped with a hydraulic cylinder to raise and
lower the cutter blade (this will require a set of remote hydraulic couplers on the tractor).
When attaching to the stationary drawbar of the tractor, you should set the distance from the
end of the tractor PTO to the center of the hitch pin hole at 14 inches. If your tractor has an
option of a 540 or 1000 RPM PTO you should install the 540 shaft.
INTRODUCTION:
TO THE PURCHASER
This 4265LPD and 4260D Poultry House Cleaner - has been carefully
designed and manufactured to give years of dependable service. In order to operate it
efficiently and maintain it properly, please read the instructions within this manual thoroughly.
Some components of this machine are labeled left or right. The notations are deter-
mined by standing behind the implement and facing the direction of forward travel.
After reading this Operator’s Manual, Please keep it for reference each season.
To insure procurement of the proper repair parts, please record your machine’s Model
Number, Serial Number, and Purchase Date as shown below:
Model No._______________________
Serial No.________________________
Purchase Date ___________________

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KMC Controls 42 Series and is the answer not in the manual?

KMC Controls 42 Series Specifications

General IconGeneral
BrandKMC Controls
Model42 Series
CategoryCleaning Equipment
LanguageEnglish