1
4265LPD & 4260D PHC OWNERS MANUAL
Table of Contents:
FORWARD
Introduction ··························································································· 3
To the Purchaser ··················································································· 3
Pre-Operational Check List ····································································· 4
SAFETY
Symbol Information ················································································ 5
Safety Decals ························································································ 6
Retail Customers Responsibility under the KMC Warranty ························· 7
Safety Procedures ·················································································· 7-8
ASSEMBLY SET-UP
General: ······························································································· 9-10
Bolt Torque Chart ·············································································· 11
Specifications:
Single Wheel Machine ········································································ 12
Tandem Wheel Machine······································································ 12
Attaching to the Implement:
Hydraulic Pump ················································································· 13-15
Tongue ····························································································· 15-16
Control Valves ·················································································· 16
Setting the Machine For Total Clean Out:
Total Clean Out Panels ······································································· 17
Conveyor Trough ·············································································· 17
Setting the Machine for Sifting:
Dry Litter Operation ··········································································· 18
Wet Litter Operation ·········································································· 18
Other Settings ··················································································· 18
OPERATIONAL SET-UP
Tractor Preparation:
Front End Weights ············································································· 19
Horsepower Requirements ································································· 19
Wheel Spacing ·················································································· 19
Drawbar Position ··············································································· 19
Hitching to the Implement:
Setting Tractor to the Proper Speed ···················································· 20
Setting Machine Drive Components ····················································· 20
Setting Machine to the Proper Depth ··················································· 21
Operating the Dump Tank ··································································· 21
To Next Page
Loading...