KNF Laboport N820 - 11 Ordering Information; Pumps and Spare Parts; Accessories for Pump Systems

Ordering Information LABOPORT Pumps and Systems
46 Translation of original Operating Instructions, english, KNF 121211-121345 01/10
11. Ordering Information
11.1. Pumps and Spare Parts
A service set contains:
 1 diaphragm and 2 valve plates/sealings for one-headed
pumps
 2 diaphragms and 4 valve plates/sealings for two-headed
pumps
Pump type Order-No. pump Order-No. Service Set
N 810 FT.18 057986 058077
N 820 FT.18 057901 058078
N 840 FT.18 057911 058079
N 810.3 FT.18 057500 057357
N 820.3 FT.18 057501 057358
N 840.3 FT.18 057502 057359
N 840.1.2 FT.18 057571 057359
N 842.3 FT.18 057634 057359
Tab. 36
11.2. Accessories for Pump Systems
Accessory Type
N 810 FT.18 N 820 FT.18 N 840 FT.18 N 810.3 FT.18 N 820.3 FT.18 N 840.3 FT.18 N 840.1.2 FT.18 N 842.3 FT.18
Order-No.
Baseplate and mounting
NP 810/820 X X X X 028129
Baseplate and mounting
NP 840 X X X X 028128
Separator complete including tray
NR 800 X X X X X X X X 026225
High performance condenser (in-
cluding support)
NH 800
X X X X X X X X 026231
Gas ballast
NG 810 X 028476
Gas ballast
NG 820/840 X X X 028477
Vacuum controller (including support
and electrical supply unit)
NC 800A
X X X X X X X X 046380
Vacuum controller (including sup-
port) *
NC 800B
X X X X X X X X 046381
Two vacuum controllers (complete
including support and electrical
supply unit)
NC 800A/B
X X X X X X X X 046382
Vacuum chemical tubing for pneu-
matic connection** (yard ware***)
X X X X X X X X 028187
Tab. 37 * For retrofitting from system SC to SCC
** Material: Norprene A60G
*** Please specify the required length (in whole meters).