129
128
129
Message Description Action
Cannot change
settings under this
mode.
Appears during shooting mode if a
function can not be set by rotating
the function ring.
Remove the message
after 2 seconds and
return to shooting.
Improper alignment.
Please try again.
The offset is too big for panorama
shooting.
Remove the message
after 2 seconds and
return to shooting.
Connection Failed!
In the case of failing to connect to a
PC or a printer.
In the case of failing to connect to a
TV-system (including HDMI).
Remove cable and retry
connection
In this capture ********
Still size limited to
** M
After choosing the image size in the
Function Ring (Smart), this message
may occur when the still size limit is
reached.
Remove the message
after 2 seconds and
return to shooting.
Capture reached
maximum limit
Press the shutter to capture images
in recording a video. If the number
of images captured exceeds 15,
there will be a prompt if you press
the shutter again.
The message will
disappear in 2 seconds
with no inluence to
video recording.
To Next Page
Loading...
Need help?
General
