122
123
USB Mode
TV-System
PC
NTSC
HDMI CEC Control
Off
Eye-Fi
On
Exit
Set
Select
If the Eye-Fi card is not available
in the camera, this feature is not
displayed.
This camera supports wireless connection
for Eye-Fi memory cards. Enable the Eye-Fi
connection by following the steps below.
1. Press the button, press the
[ ]/[ ] button to select
and press the button to enter the
menu.
2. Press the [ ]/[ ] button to
select .
3. Press the [ ]/[ ] button
to select「Eye-Fi」and press the
button to enter the menu.
4. Press the [ ]/[ ] button to
select「On」or「Off」and press the
button to conirm.
Set Eye-Fi Card Connection Mode