4
Chapter 1
Loading the Batteries
Two AA batteries (non-rechargeable) are included with your camera.
1 Turn the Mode dial to Off.
2 On the bottom of the camera, slide the
battery door and lift to open.
3 Insert the AA batteries as shown.
4 Close the battery door.
IMPORTANT BATTERY INFORMATION
For acceptable battery life and to make
sure your camera operates
dependably, do not use alkaline
batteries.
If you purchased an optional Kodak CRV3
lithium battery, insert it as shown.
If you purchased the Kodak EasyShare
camera dock 6000, see page 66 for details
on installing the included Kodak EasyShare
Ni-MH rechargeable battery.
See page 97 for the other types of batteries
you can use in your camera.
AA
CRV3
(optional)
To Next Page
Loading...
Need help?
General
