52
Chapter 6
Changing the Default Print Quantity
The Default Print Quantity setting determines the value that is displayed on the
Share Print screen (page 48). The default value is 1.
1 Press the Menu button.
2 Press to highlight Setup Menu , then press the OK button.
3 Press to highlight Default Print
Quantity , then press the OK button.
4 Press to select the new default
quantity, then press the OK button.
5 Press the Menu button to exit the menu.
This setting remains until you change it.
Turning Off Quickview
After you take a picture or video, Quickview displays it on the camera screen
for approximately 5 seconds (see page 17 and page 32). To save battery
power, turn off Quickview.
1 Press the Menu button.
2 Press to highlight Setup Menu , then press the OK button.
3 Press to highlight Quickview , then press the OK button.
4 Press to highlight Off, then press the
OK button.
5 Press the Menu button to exit the menu.
The picture is not displayed on the
camera screen after you take it. To see the
picture or video, press the Review button.
This setting remains until you change it.
To Next Page
Loading...
Need help?
General
