6
Chapter 1
Turning On the Camera
Turn the Mode dial from Off to any other
position.
The ready light blinks green while the
camera performs a self-check, then glows
green when the camera is ready to take
pictures (or videos, if the mode dial is set
to ).
In Still and Video modes, status icons
appear on the camera screen. See
Checking Camera Status, page 8.
Changing the Display
Ready
OK
light
If you want to Then do this
Turn the camera screen on
(enter Liveview) or off.
Press the OK button.
Change the Liveview setting
so that it is on whenever the
camera is on.
See Turning On Liveview in Still Modes,
page 53.
Redisplay the status icons. Press .
Turn off the camera. Turn the Mode dial to Off.
The camera completes operations that
are in process.
To Next Page
Loading...
Need help?
General
