Kodak Dryview 5850 - Page 36

3-12 2G0733 2011-09-09
Troubleshooting
28931 Processor: Internal
Communications Failure
1. Shut down the imager, then start the imager.
2. If the error persists, call for service.
29154 Densitometer: Internal
Communications Failure
1. Shut down the imager, then start the imager.
2. If the error persists, call for service.
29924 Densitometer: Internal
Diagnostic Failure
1. Shut down the imager, then start the imager.
2. If the error persists, call for service.
29925 Densitometer: Internal
Diagnostic Failure
1. Shut down the imager, then start the imager.
2. If the error persists, call for service.
29926 Densitometer: Internal
Diagnostic Failure
1. Shut down the imager, then start the imager.
2. If the error persists, call for service.
29927 Densitometer: Internal
Diagnostic Failure
1. Shut down the imager, then start the imager.
2. If the error persists, call for service.
29931 Densitometer: Internal
Communications Failure
1. Shut down the imager, then start the imager.
2. If the error persists, call for service.
36931 Local Panel: Internal
Communications Failure
1. Shut down the imager, then start the imager.
2. If the error persists, call for service.
36935 Local Panel: No
Communications from MCS
1. Shut down the imager, then start the imager.
2. If the error persists, call for service.
Table 3-5: Condition Codes (Continued)
Code Web Portal Message User Action