6
Chapter 1
Automatic Powerdown Saves Batteries
The automatic powerdown features help extend battery life by turning off the
camera when it has been inactive (no buttons pushed and no pictures or
videos taken) for the given time period.
Setting the Clock
It is important to set the correct date and time if you want to imprint the date
on your pictures (see page 24) or videos (see page 29).
1 Turn on the camera and turn the Mode dial to Setup .
2 Highlight the Date/Time Set menu,
then press the Select button.
The date format is YYYY/MM/DD. The time
is displayed in a 24-hour format.
3 Press the arrow buttons to move
through the fields. Press the arrow
buttons to adjust the date and time settings.
4 Press Select to accept the changes.
This setting remains until you change it.
NOTE: The Set Date & Time screen is automatically displayed the first time you
turn on the camera.
Powerdown
Feature
Activated
after
Camera Behavior To reactivate
camera
Sleep 1 minute LCD is turned off Press any button.
Sleep, QuickView on 5 seconds
Deep Sleep 8 minutes Most camera circuits off
Auto Off 3 hours All camera circuits off Turn the power switch
off, then back on.
To Next Page
Loading...
Need help?
General
