56
Chapter 8
Installing the Dock Insert
KODAK DX-series cameras are packaged with a Dock insert, which is used to
custom-fit the camera to the Camera Dock.
1 Place the front tabs on the insert into the
slots in the Camera Dock cavity.
2 Fit the insert down into the cavity and snap
the insert into place.
To order an insert for your camera, contact
Kodak Customer Support, see page 74.
Connecting the Camera Dock
Connect the Camera Dock to your computer and to an external power source.
You will need the USB cable that is included with your camera, and the AC
adapter that is included with the Camera Dock.
Make sure your camera is not in the Camera Dock when you are connecting to
power and the computer.
1 Plug the labeled ( ) end of the USB cable
into the labeled USB port on your computer.
For details, see your computer User’s Guide.
2 Plug the other end of the USB cable into the
labeled USB connector on the back of the
Camera Dock.
3 Plug the AC adapter into the back of the
Camera Dock and into a power outlet.
Your AC adapter may be different from the one pictured, or may have
additional plugs. Use the plug that accommodates your type of power outlet.
Leave the Camera Dock connected to the computer for easy access for
transferring pictures, charging the Battery Pack, and providing power to the
camera.
To Next Page
Loading...
Need help?
General
