50
Chapter 7
Connecting With the KODAK Camera Dock
1 Open the connection door on the bottom of
the camera.
2 Place the camera in the Camera Dock.
3 Push the Connect button.
You can transfer files while the green
light is blinking.
For more information, see Chapter 8, Using the
KODAK Camera Dock.
NOTE: You can also use a KODAK USB Picture Card Reader to transfer your
pictures. See your KODAK retail dealer or visit our Web site at http://
www.kodak.com/go/accessories.
Transferring Your Pictures and Videos
KODAK Picture Transfer Software automatically opens on your computer when
you have connected as shown in the previous section, Connecting to the
Computer.
Transferring on a WINDOWS-based Computer
m Click Transfer Now to transfer your pictures and videos to the
computer.
Your pictures are transferred to the following default location on your
computer: C:\Kodak Pictures.
m Click Setup before you click Transfer Now if you wish to change
the default options for transferring files.
To Next Page
Loading...
Need help?
General
