38
Chapter 4
Running a Slide Show
Use the Slide Show feature to sequentially display your pictures and videos on
the camera LCD or on a television (see page 39 for connecting to an external
device).
Starting the Slide Show
1 Turn the Mode dial to Review and press the Menu button.
2 Highlight the Slide Show menu , then press the Select button.
3 Highlight Begin Show, then press Select.
The pictures and videos in the camera
(from internal memory or Picture Card,
depending on your picture storage
location) are each displayed/played once,
in the order in which you took them. Then
the camera returns to the Menu screen.
4 To cancel the Slide Show, press Select.
Changing the Display Interval
The factory interval setting displays each picture for 5 seconds. You can
increase the display interval to up to 60 seconds.
NOTE: Videos are played in their entirety, even if they are longer than the Slide
Show display interval.
1 On the Slide Show screen, highlight Interval, then press Select.
2 Use the arrow buttons to select how long you wish to display each
picture (5-60 seconds).
3 Press the Select button.
The interval setting remains until you change it.
To Next Page
Loading...
Need help?
General
