39
Chapter 4
Connecting to a Television or Other
External Device
You can display your pictures, play your videos, or run a Slide Show on any
external video device that is equipped with an audio/video input, such as a
television, computer monitor, or digital projector. Use the audio/video cable
included with your camera.
1 Connect the audio/video cable to the
video-out port on the camera.
2 Connect the audio (white) and video
(yellow) plugs to the audio and video-in
ports on your television.
3 Refer to your television User’s Guide for
details on audio and video-in setup.
The camera LCD turns off and the television screen acts as the camera
display. Use the camera controls as usual .
NOTE: If you connect or disconnect the audio/video cable while a slide show is
running, the slide show stops. When you restart it, by selecting Begin
Show, it begins again with the first picture in your camera.
To Next Page
Loading...
