27
Chapter 2
Flash Icon Behavior
Flash Settings In Each Mode
Flash settings are pre-set for each picture taking mode.
* In these modes, when you change to Red-eye, it remains until you change it.
Flash icon Cause Action
Blinking Flash is recharging. Wait. Take picture when the icon
stops blinking.
Blinking red- Flash button is pressed,
flash unit is closed.
Open flash unit or take picture
without flash.
Capture Mode Default
Flash
Setting
Available Flash
Settings (press
the Flash button
to change)
To Return to the
Default Flash
Setting:
Auto Auto* Auto, Flash Off,
Fill Flash, Red-eye
Exit the mode or turn
off the camera.
PASM Auto Reset manual options
(see page 40).
Sport Auto Exit the mode or turn
off the camera.
Portrait Auto*
Night Auto*
Video Off None Flash cannot be
turned on.
Burst Off
To Next Page
Loading...
