28
Chapter 2
Using an External Flash Unit
Use an external flash unit when you want additional or specialized lighting. You
can use the camera’s built-in flash as well to provide extra fill flash.
1 Turn off the camera and flash unit.
2 Plug your external flash unit cable into the
external flash connector on the camera.
The external flash unit is live when
connected to the camera. Each time the
camera takes a picture, the external flash
unit is signaled to flash, regardless of the
camera flash setting.
Refer to your external flash unit user’s
guide for details.
NOTE: The connector accepts all standard
external flash cables, maximum 500
volts.
External
flash
connector
To Next Page
Loading...
