50
Chapter 3
Putting Yourself in the Video
The Self Timer creates a 10-second delay between the time you press the
Shutter button and the time video recording begins.
1 Turn the Mode dial to Video , then press
the Self Timer button.
The Self Timer icon appears in the
status area and blinks during the timer
countdown.
2 Place the camera on a flat surface or use a
tripod.
3 Compose the scene. Press the Shutter
button completely down and release it.
Move so that you are in the scene.
4 To stop recording, press the Shutter button
again.
! The Self Timer light blinks slowly for 8 seconds (then quickly for 2
seconds) before the video begins recording. It stays on while recording.
! The Self Timer turns off after you take the video or if you change
modes.
! To cancel the Self Timer countdown before the video is taken, press the
Self Timer button. (The Self Timer setting remains active.)
! To turn off the Self Timer, press the Self Timer button twice.
TIP: Want to be in the video without filming yourself walking in and out of the
scene? Use the Self Timer and Video Length (see page 48) features.
Self
Timer
Self
light
Timer
button
To Next Page
Loading...
Need help?
General
