EasyManua.ls Logo

Kodak EasyShare 5500 - Clean the Scanner Lid; Format Memory Card; Print Diagnostic Sheet

Kodak EasyShare 5500
181 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 8
WARNING
Do not use abrasives, acetone, benzene, or carbon tetrachloride on the glass, since they can
damage it. Do not place or spray liquid directly on the glass. The liquid might seep under the
glass and damage the device.
3 Dry the glass with a lint fee cloth.
Clean the Scanner Lid
Minor debris can accumulate on the document backing located underneath the scanner lid of the Kodak
EasyShare AiO.
1 Turn off the EasyShare AiO and raise the lid.
2 Clean the lid underside with a soft cloth or sponge slightly moistened with a mild soap and warm water.
3 Wipe the underside gently to loosen debris. Do not scrub.
4 Dry the underside with a chamois or soft cloth.
WARNING
Do not use paper-based wipes, as these might scratch the underside.
5 If further cleaning is needed, repeat the previous steps using isopropyl (rubbing) alcohol, and wipe the
underside thoroughly with a damp cloth to remove any residual alcohol.
Format Memory Card
Formatting will erase all the data on a memory card.
1 Insert a memory card into the appropriate slot.
2 Press Menu.
3 Press b until Format Memory Card is selected.
4 Press OK.
5 Press Start to begin formatting.
Print Diagnostic Sheet
The Diagnostic Page contains information about your printer that can be useful when contacting Kodak
support.
1 Press Menu.
2 Press b until Print Diagnostic Sheet is selected.
3 Press OK.
4 Press Start to begin printing.
138 Kodak EasyShare 5500 AiO

Table of Contents

Other manuals for Kodak EasyShare 5500

Related product manuals