Kodak EasyShare 5500 - Date and Time

Getting Started
Minutes to Standby
When the Kodak EasyShare All-in-One is idle for the standby power setting timeout period, it enters the
Standby state. The On/Off indicator remains lit, but power consumption is reduced. When in the Standby
state, any activity such as a single button press, or inserting camera card, brings the EasyShare AiO out of
the Standby state and returns it to the Ready state.
NOTE: Faxes and print jobs from wireless devices (included PC’s linked over the WLAN) can be received
while in standby.
You can set the standby timeout from 10 – 30 minutes. The default setting is 15 minutes.
1 Press Menu to display the main menu.
2 Press b until Control Panel Settings is selected.
3 Press OK. The Power Settings menu is displayed with Minutes to Standby selected.
4 Press _ or ` to change the standby timeout period.
5 Press OK.
Date and Time
Your Kodak EasyShare All-in-One contains a clock for stamping the date and time on scans to a memory
card and faxes.
1 Press Menu to display the main menu.
2
Press b until Date and Time is selected.
3
Press OK to go to the Date and Time menu.
4
Press _ or ` to set the Year.
5
Press OK.
6
Press _ or ` to set the Month.
7
Press OK.
8
Press _ or ` to set the Day.
9
Press OK.
10
Press _ or ` to set the Hour.
11
Press OK.
12
Press _ or ` to set the Minute.
13
Press OK.
User’s Guide 27