Kodak EasyShare 5500 - Scan Destinations

Chapter 6
Scan to Application
The Home Center software enables you to maintain a list of scan destination applications.
1
Place a photo or photos face down on the scanner glass.
2
Press Scan to display the Scan menu.
3
Press _ or ` to select Photo.
4
Press b to select Scan To.
5
Press ` to select Application.
6
Press b to until Application is selected.
7
Press _ or ` to select another application.
8
Press Start.
Scan to Memory Card
1 Insert a Memory Card into the appropriate card slot.
WARNING
Never attempt to remove a memory card while it is being accessed. Doing so can damage
files on the card. You can safely remove a card only when the status light next to the slots
is not blinking.
2 Place a photo or photos face down on the scanner glass.
3 Press Scan to display the Scan menu.
4 Press _ or ` to select Photo.
5 Press b to select Scan To.
6 Press _ or ` to select Memory Card.
7 Press Start.
Scanning Documents
With the Control Panel Scan menu, you can scan documents to a file, application, or memory card.
84 Kodak EasyShare 5500 AiO