Chapter 9
Printer Access Door Message
Message Cause Action/Solution
Printer access door open
Close the printer access door.
The Printer access Door on the
top of the printer is open while
printing.
Close the Printer Access Door.
Scanner Message
Message Cause Action/Solution
Scan operation failed. Please try
again.
Scan operation initiated from the
printer fails to communicate with
the computer within a timeout
period. The computer was
supposed to start the scan
operation.
Retry the scan operation.
Bluetooth Message
Message Cause Action/Solution
Bluetooth connection lost.
Check connection and resend.
Bluetooth
communication/connection
dropped while downloading a file
to the printer.
Check the connection and
resend.
Troubleshooting
AiO Fails to Power On
The power supply is not properly connected.
1 Make sure the power cord is connected to the power supply and plugged into a grounded power outlet
or power strip.
2 If you are using a power strip, make sure it is turned on.
3 If you are using a switched power outlet, make sure the switch is on.
4 Make sure the power outlet is supplying power.
5 If none of the above corrects the problem, contact Kodak support.
154 Kodak EasyShare 5500 AiO
To Next Page
Loading...
