Maintenance
To clean printhead from control panel
1 Press Menu to display the Main Menu.
2 Press b until Clean Printhead is selected.
3 Press OK to go to the Clean Printhead menu.
4 Press OK to perform a Basic Clean.
or
Press
b to select Deep Clean and press OK to perform a Deep Clean.
Replace Printhead
1 Make sure the AiO printer is on.
2 Open the printer access door. The carriage moves to a center position.
3 Wait until the printhead is idle and silent, then pinch the pinch latch on the ink cartridge with your
thumb and forefinger and lift it out of the print head. Remove both ink cartridges and place them on a
flat surface with the ink pads up.
4 Unlatch the printhead by pressing the button in the upper-left corner of the carriage.
User’s Guide 143
To Next Page
Loading...
