Copy
3
Click the Copy tab.
5 Select Draft, Normal, or Best.
6 Click OK or Apply.
Copy Options
1 On the main Home Center window, click Configure Settings to display the settings options.
2 Click AiO Printer to open the AiO Printer dialog.
3 Click the Copy tab.
4 Set the following options as desired.
Output: Select Same Size, Fit to Page, Scale Percentage, or Photo Layouts from the drop-down list.
Size: Enabled when you select Scale Percentage in the Output drop-down list. Use this drop-down list
to set the percentage you want to scale your copies.
Layout: Enabled when you select Photo Layouts from the Output pop-up list. Select your preferred
layout to print one of more photos on the size paper loaded (see Layouts).
Brightness: Use the slide-bar to increase or decrease the brightness of copies.
Quantity: Sets the default number of copies to the value you select.
Print colors as grayscale: Copying a color photo in grayscale makes it look like a traditional black-
and-white photograph. The grayscale palette contains white, black, and 254 shades of grey. Each color
in the image is replaced with a gray that matches its lightness value.
5 Click OK or Apply.
User’s Guide 81
To Next Page
Loading...
