9
Chapter 1
Inserting an MMC/SD Card
Optional MMC/SD cards provide removable, reusable storage for pictures.
CAUTIO N:
The card can only be inserted one way; forcing it may
damage the camera or card.
Do not insert or remove a card when the green ready light
is blinking; it may damage your pictures, card, or camera.
1 Turn off the camera.
2 Open the card door.
3 Orient the card as shown.
4 Push the card into the slot to seat the
connector. (To remove the card, push it in,
then release it. When the card is partially
ejected, pull it out.)
5 Close the door.
See page 83 for storage capacities. Purchase KODAK Multimedia Cards at your
Kodak retail dealer or on our Web site at
http://www.kodak.com/go/accessories.
To Next Page
Loading...
Need help?
General
