29
Chapter 3
Running a Slide Show
Use the Slide Show to display your pictures on the LCD in the order in which
you took them. To run a slide show on a television or other external device, see
page 30.
Starting the Slide Show
1 Press the Review button, then press the Menu button.
2 Highlight Slide Show , then press the Select button.
3 Highlight Begin Show, then press the Select
button.
The pictures are each displayed once in
the order in which you took them. Then
the camera returns to the Menu screen.
See Turning On Loop, page 30, for
continual display.
4 To cancel the Slide Show, press the Select button.
NOTE: If you connect or disconnect the video cable while a slide show is
running, the slide show stops.
Changing the Display Interval
The default setting displays each picture for 5 seconds. You can increase the
display interval to up to 60 seconds.
1 On the Slide Show menu, highlight Interval,
then press the Select button.
2 Press to select a display interval.
To scroll through the seconds quickly, press
and hold .
3 Press the Select button.
The Interval setting remains until you change it.
To Next Page
Loading...
Need help?
General
