21
Chapter 2
Setting Exposure Compensation
Use Exposure Compensation to control how much light is allowed into the
camera. The exposure range is +2 to -2 in 1/2-step increments.
NOTE: This setting is ideal for controlling pictures in which the light source is
behind the subject (backlit), or for correcting pictures that are too light
or too dark.
1 In Capture mode, press the Menu button.
2 Highlight Exposure Compensation , then press Select.
3 Press to select the
Exposure Compensation setting.
m If your pictures are too light,
press to decrease (-) the
value.
m If your pictures are too dark,
press to increase (+) the
value.
4 Press Select to accept the change
and return to the menu screen.
5 Press Menu to exit the menu
screen.
This setting remains until you
change it.
To Next Page
Loading...
