69
Chapter 9
Camera Ready Light Status
Camera Ready Light
Problem Cause Solution
Ready light does not
turn on and the
camera does not
work.
Camera is not turned
on.
Turn on the camera
(page 5).
Batteries are
exhausted.
Replace or recharge the
batteries (page 4, page 54).
Power switch was on
when batteries were
reloaded.
Turn camera off, then back
on.
Ready light glows
steady green.
Camera is on; ready
to take a picture.
The camera is operating
normally.
Ready light blinks red. Batteries are low or
exhausted.
Replace or recharge the
batteries (page 4, page 54).
Ready light
To Next Page
Loading...
