Kodak EasyShare G600 - Powering Your Printer Dock with a Battery

Printer dock portability
www.kodak.com/go/support
35
Powering your printer dock with a battery
Charge the printer battery before taking it with you. You must connect the AC power
adapter to your printer dock to charge the attached printer battery (sold separately).
Purchase the Kodak Li-Ion rechargeable printer battery KPB-100 at
www.kodak.com/go/accessories.
Attaching the printer battery (optional)
1
Push down on the
connector-cover-release tab.
2
Remove the connector cover
and store it in a safe place.
3
Snap the battery into place.
Remove the battery and reattach
the connector cover when the
battery is not being used.